Fence Mesh Panel Overall Process:Mesh Panel Production- Bending- Electro Galvanized or Hot Dipped Galvanized-
Dip Plastic of Spray Plastic.
1. Mesh Panel Quality Control£º Purchase iron wire to meet the requirements- incoming inspection- straightening and cutting-
Debugging Machine ( Mesh Aperture Size Setting)- place warp and weft- First Piece Test Weld or Once again Debugging Machine
- Confirm the first panel quality- Bulk Production and Self Inspection- Process Inspection and Casual Inspection -
Finished Product Self Inspection, Special Inspection and Casual Inspection-(Storage, Surface Treatment or Delivery, according to the customer¡¯s need. And continued into the relevant process,
if need the frame welding and upright post supporting or make the surface treatment. Please refer to the fabrication process of the frame fence in detail)
Galvanized wire entering factory and on-site inspection 1 | Straightening and cutting process 2 |
Setting the mesh size for the NC machine mesh size 3 | Place the warp and weft 4 |
First Piece Test Weld or Once again Debugging Machine 5 | Confirmation of first piece each parameter 6 |
Bulk Production 7 | Worker self- inspection 8 |
Visual Examination (Mesh, Glancing Flatness, Short wire broken wires connect wire 9 | Wire diameter inspection by inspector 10 |
Mesh Aperture inspection by inspector 11 | Mesh width inspection 12 |
Mesh Width Inspection 13 | Mesh Panel Diagonal Line Inspection 14 |
2. Bending Technique Process Control for Fence Mesh
Bending Technique Process: Fix and inspect for the suitable clamping fixture ¨C Check the open welding ¨C bending - Bend apparent inspection ( Mesh panel levelness, Top wire centralizer, Opening weld and breakage) - Opening degree inspection -Bending depth inspection - Diagonal line inspection - (Storage, Surface Treatment or Delivery, according to the customer¡¯s need.
And continued into the relevant process, if need the frame welding and upright post supporting or make the surface treatment.
Please refer to the fabrication process of the frame fence in detail)
Check the mesh panel and bend 1 | Diagonal line inspection after bending 2 |
Opening degree inspection for the bending place 3 | Bending depth inspection 4 |