Fence concept: The connection way for the mesh panel and upright post are called fence mesh, such as the connection of mesh panel and upright post, the connection for the frame and upright post. The following main introduction are the control process of upright post and frame mesh panel.
(1) Upright post production process( Round pipe, square pipe and rectangular tube: Pipe wall thickness and diameter measurement- blanking and cutting ( Or cutting angle) - Mould production and confirmation ¨CWeld side ear for upright post welding ( Or punch a hole) - Bend or weld the upright post- Inspector make a inspection ¨C Make surface treatment for the mesh panel according to the customer¡¯s needs.
Square pipe wall thickness measurement 1 | Blanking and cutting (Or cutting angle) 2 |
Mould production and confirmation 3 | Welding process for the upright post 4 |
Half of Y type upright bending (or welding) 5 | Measurement for the upright post connections (hole pitch)6 |
Kinds of upright post after dipping or spraying plastic 7 |
(2). Quality control process for the frame fence
Production process for the frame fence: Purchase needed pipe and inspect the wall thickness, length and weight ¨C blanking and cutting - Mould production and confirmation ¨C Weld frame and self inspection ¨C Weld the frame and mesh panel ¨C First set of net frame and upright post structure installation and inspection - Process inspection - Count finished products and spot check ¨C Be put into storage and convert into next process
Frame pipe cutting ( cutting angle) and size measurement 1 |
|
Frame welding 3 | Mesh panel and frame welding 4 |
Frame fence semi- products 5 | Parameter test for frame finished products 6 |