ËùÊô·ÖÀࣺWater and electricity construction industry
·¢²¼ÈÕÆÚ£º2015-10-12
ä¯ÀÀ£º´Î
×Éѯµç»°£º13903185532
Cold Rolled Ribbed Reinforcement MeshAlso named: reinforcing welded mesh,welded reinforced mesh,reinforcing mesh,reinforcing weld mesh panels,reinforcing mesh,construction reinforcing mesh.
Cold Rolled Ribbed Reinforcement Mesh assortment:cold-rolled ribbed reinforcing mesh,hot-rolled ribbed reinforcing mesh,The most widely application of cold-rolled ribbed steel mesh;
Cold Rolled Ribbed Reinforcement Mesh is hot rolled wire rods by the multi-channel cold reducing pressure rib and the elimination of internal stress formed with two or three surfaces on the crescent shaped reinforced. The mesh is welded by the cold ribbed steel net. He in the prestressed concrete is the update to the cold drawn low carbon wire replacement products, substitution reinforced grade I, is a better similar processing of cold drawn steel.
Cold Rolled Ribbed Reinforcement Mesh Material: CRB550 cold-rolled ribbed steel bar, CRB550 cold drawn round steel bar, HRB400 hot rolled ribbed bar
Cold Rolled Ribbed Reinforcement Mesh Size:D5¡¢D6¡¢D7¡¢D8¡¢D9¡¢D10¡¢D11¡¢D12¡¢E5¡¢E6¡¢E7¡¢E8¡¢E9¡¢E10¡¢E11¡¢E12
![]() | ![]() |
Steel mesh welding scene1 | Reinforced net real estate application 2 |
Reinforcing welded mesh is recognized is a new, efficient, high-quality construction steel and reinforced concrete structures at home and abroad and widely used in industrial and civil buildings in the floor, roof, walls, floors, concrete pavement, pavement, airport runway, tunnel lining, water conservancy facilities, docks, concrete pipe, columns and so on.
1.The specifications of Reinforced mesh and welded reinforced mesh:
Wire Diameter£º2-18mm;
Aperture£º30mm*30mm to 200mm*200mm;
Mesh size is a square in commonly£¬and also is rectangular mesh;
The longest: 12m widest: 2.5m;
In order to transportation of convenience suggested width in 2.3M length in 6m-12m.
Models table of Stereotypes reinforced welded mesh, Mechanical properties of cold rolled steel bar,Weight formula of reinforcement mesh
The technical parameters of the reinforced welded mesh: (mm)
Parameters | GWC2400 | GWC2600 | GWC3000 |
Longitudinal spacing | 100¡¢200¡¢300¡¢400 | 100¡¢200¡¢300¡¢400 | 100¡¢200¡¢300¡¢400 |
Transverse spacing | 50-600 | 50-600 | 50-600 |
Diameter | 5-12 | 5-12 | 5-12 |
Maximum width | 2400 | 2600 | 3000 |
Material | hot-rolled round bar,cold-rolled round bar, hot-rolled ribbed bar, cold-rolle d ribbed bar |
Weight formula of reinforcement mesh
Weight£¨KG£©=Wire Dia.(MM) xWire Dia.(MM)X Length£¨M)X 0.00617£¨¦Õ10 steel bar 0.616539kg/m£©
Mechanical Properties Of Cold Rolled Steel Bar
Diameter (mm) | yield strengh¦Ò0.2£¨MPa£© | Tensile strength ¦Òb(MPa) | elongation ¦Ä10£¨%£©
| cold bending 180¡ã D¡ªbending mandrel D¡ªdiameter |
¡Ü5 | ¡Ý00 | ¡Ý550 | ¡Ý8 | D=3d |
5<d<10 | ||||
¡Ý10 |
Models Table Of Stereotypes Reinforced Welded Mesh
Code | ¡¤ Longitudinal Reinforcement | Transverse Reinforcement | Weight (kg/m2) | ||||
Wire dia. £¨mm) | Spacing £¨mm) | Area £¨mm2/m) | Wire dia. £¨mm) | Spacing mm) | Area £¨mm2/m) | ||
A12 | 12 | 200 | 566 | 12 | 200 | 566 | 8.88 |
A11 | 11 | 475 | 11 | 475 | 7.46 | ||
A10 | 10 | 393 | 10 | 393 | 6.16 | ||
A9 | 9 | 318 | 9 | 318 | 4.99 | ||
A8 | 8 | 252 | 8 | 252 | 3.95 | ||
A7 | 7 | 193 | 7 | 193 | 3.02 | ||
A6 | 6 | 142 | 6 | 142 | 2.22 | ||
A5 | 5 | 98 | 5 | 98 | 1.54 | ||
B12 | 12 | 100 | 1131 | 8 | 200 | 252 | 10.90 |
B11 | 11 | 950 | 8 | 252 | 9.43 | ||
B10 | 10 | 785 | 8 | 252 | 8.14 | ||
B9 | 9 | 635 | 8 | 252 | 6.97 | ||
B8 | 8 | 503 | 8 | 252 | 5.93 | ||
B7 | 7 | 385 | 7 | 193 | 4.53 | ||
B6 | 6 | 283 | 7 | 193 | 3.73 | ||
B5 | 5 | 196 | 7 | 193 | 3.05 | ||
C12 | 12 | 150 | 754 | 12 | 200 | 566 | 10.36 |
C11 | 11 | 634 | 11 | 475 | 8.70 | ||
C10 | 10 | 523 | 10 | 393 | 7.19 | ||
C9 | 9 | 423 | 9 | 318 | 5.82 | ||
C8 | 8 | 335 | 8 | 252 | 4.61 | ||
C7 | 7 | 257 | 7 | 193 | 3.53 | ||
C6 | 6 | 189 | 6 | 142 | 2.60 | ||
C5 | 5 | 131 | 5 | 98 | 1.80 | ||
D12 | 12 | 100 | 1131 | 12 | 100 | 1131 | 17.75 |
D11 | 11 | 950 | 11 | 950 | 14.92 | ||
D10 | 10 | 785 | 10 | 785 | 12.33 | ||
D9 | 9 | 635 | 9 | 635 | 9.98 | ||
D8 | 8 | 503 | 8 | 503 | 7.90 | ||
D7 | 7 | 385 | 7 | 385 | 6.04 | ||
D6 | 6 | 283 | 6 | 283 | 4.44 | ||
D5 | 5 | 196 | 5 | 196 | 3.08 | ||
E11 | 11 | 150 | 634 | 11 | 150 | 634 | 9.95 |
E10 | 10 | 523 | 10 | 523 | 8.22 | ||
E9 | 9 | 423 | 9 | 423 | 6.66 | ||
E8 | 8 | 335 | 8 | 335 | 5.26 | ||
E7 | 7 | 257 | 7 | 257 | 4.03 | ||
E6 | 6 | 189 | 6 | 189 | 2.96 | ||
E5 | 5 | 131 | 5 | 131 | 2.05 |