Reinforcing welded mesh is manufactured from ribbed wires (CRB550), which are welded together with equal spacing in both directions to form square apertures,or different spacing in each direction to form rectangular apertures. It is used to construction and fence mesh usually. Compared with other panels, reinforcing welded mesh is stronger and cheper. Then our products usually are purchased by the construction site.
Reinforcing welded mesh are the same or different diameters of longitudinal and transverse reinforcing steel bar is arranged with a certain distance at right angles to each other. All cross-points are welded together with strong electric resistance.
Reinforced welded mesh is divided into Setting reinforced welded mesh and Customized reinforced welded mesh according to the diameter, length and spacing.
Reinforcing welded mesh production standards:
"Reinforced concrete with steel welded" GB / T1499.3-2002
"Reinforced concrete structures welded mesh technology" JGJ114-2003, J276-2003
Reinforcing mesh panel should a rectangular arrangement, reinforced steel mesh spacing of 150 ~ 300mm. May be 150mm ¡Á 150mm; 200mm ¡Á 200mm, 200mm ¡Á 250mm, 250mm ¡Á 300mm, 300mm ¡Á 300mm in combination. Lap length steel mesh of not less than 30d (d for the bar diameter). The thickness of the protective layer of sprayed concrete steel mesh of not less than 20mm, when using double steel mesh sheet, spacing distance between two layers of wire mesh piece of not less than 60mm.
 |  |
| Indoor ground structure 1 | Highway engineering scene 2 |
 |
| Construction reinforcing mesh 3 |
Reinforcing welded mesh specification:
AS/NZS 4671:2001 Australia/New Zealand Standard (SIZE:6000mmX2400mm) |
Ref No. | Std Unit | Longitudinal Wires (mm) | Edge Wires(mm) | Cross Wires(mm) | Mass Kg |
SL81(F81) | Sheet | 7.60@100 | 7.60@100 | 7.60@100 | 105 |
SL102(F102) | Sheet | 9.50@200 | 6.75@100 | 9.50@200 | 80 |
SL92(F92) | Sheet | 8.60@200 | 6.00@100 | 8.60@200 | 66 |
SL82(F82) | Sheet | 7.60@200 | 5.37@100 | 7.60@200 | 52 |
SL72(F72) | Sheet | 6.75@200 | 4.77@100 | 6.75@200 | 41 |
SL62(F62) | Sheet | 6.00@200 | 4.77@100 | 6.00@200 | 33 |
SL52(F52) | Sheet | 4.77@200 | 4.77@100 | 4.77@200 | 21 |
B S4483 BRITISH STANDARD |
Ref No. | Std Unit | Longitudinal Wires(mm) | Cross Wires(mm) | Pitch of wire | No. of sheet per ton | Mass Kg/m |
A393 | Sheet | 10 | 10 | 200@200 | 15 | 6.16 |
A252 | Sheet | 8 | 8 | 200@200 | 22 | 3.95 |
A193 | Sheet | 7 | 7 | 200@200 | 29 | 3.02 |
A142 | Sheet | 6 | 6 | 200@200 | 40 | 2.22 |
A98 | Sheet | 5 | 5 | 200@200 | 57 | 1.54
|
From Hebei zhuoxing metal wire mesh products co., ltd.
