所属分类：Water and electricity construction industry
发布日期：2015-10-12
浏览：次
咨询电话：13903185532
Ribbed steel mesh, Skeleton Steel bar netting, Anti-cracking reinforcement netting surface treatment
Ribbed steel mesh, Skeleton Steel bar netting, Anti-cracking reinforcement netting divided into ribbed net and without ribbed net. Common names: Construction steel mesh, geothermal, steel mesh, brick with nets, shule plate mesh, welded wire mesh, welded wire mesh, steel bar welded mesh, coal mine supporting network, wall network, etc.
Ribbed steel mesh, Skeleton Steel bar netting, Anti-cracking reinforcement fabric adopts Q195 low carbon steel wire welding and become, has a solder joint is firm, rational structure, mesh uniform, smooth surface, firm structure, integrity is strong, and then cold surface treatment (plating), hot dip plating, not easy corrosion, long service life.
DIN488 GERMAN STANDARD (SIZE:2150MMX5000MM)
Ref No. | Std Unit | Longitudinal | Cross Wires mm | Pitch of wire | Mass Kg | Mass Kg/m2 |
Q131 | Sheet | 5 | 5 | 150 @ 150 | 22.476 | 2.091 |
Q188 | Sheet | 6 | 6 | 150 @ 150 | 32.401 | 3.014 |
Q221 | Sheet | 6.5/5.0 | 6.5 | 150 @ 150 | 33.707 | 3.136 |
Q295 | Sheet | 7.5/5.5 | 7.5 | 150 @ 150 | 44.245 | 4.116 |
Q378 | Sheet | 8.5/6 | 8.5 | 150 @ 150 | 66.659 | 5.157 |
AS/NZS 4671:2001 Australia/New Zealand Standard (SIZE:6000X2400mm)
Ref No. | Std Unit | Longitudinal | Edge Wires mm | Cross Wires mm | Mass Kg |
SL81 (F81) | Sheet | 7.6 @ 100 | 7.60 @ 100 | 7.60 @ 100 | 105 |
SL102 (F102) | Sheet | 9.5 @ 200 | 6.75 @ 100 | 9.50 @ 200 | 80 |
SL92 (F92) | Sheet | 8.6 @ 200 | 6 @ 100 | 8.60 @ 200 | 66 |
SL82 (F82) | Sheet | 7.6 @ 200 | 5.37 @ 100 | 7.60 @ 200 | 52 |
SL72 (F72) | Sheet | 6.75 @ 200 | 4.77 @ 100 | 6.75 @ 200 | 41 |
SL62 (F62) | Sheet | 6 @ 200 | 4.77 @ 100 | 6 @ 200 | 33 |
SL52 (F52) | Sheet | 4.77 @ 200 | 4.77 @ 100 | 4.77 @ 200 | 21 |
BS4483 BRITISH STANDARD Round bar
Ref No. | Std Unit | Longitudinal | Cross Wires mm | Pitch of wire | No. of sheet per ton | Mass Kg/m2 |
A393 | Sheet | 10 | 10 | 200 @ 200 | 15 | 6.16 |
A252 | Sheet | 8 | 8 | 200 @ 200 | 22 | 3.95 |
A193 | Sheet | 7 | 7 | 200 @ 200 | 29 | 3.02 |
A142 | Sheet | 6 | 6 | 200 @ 200 | 40 | 2.22 |
A98 | Sheet | 5 | 5 | 200 @ 200 | 57 | 1.54 |
 |  |
| 17 Meters Galvanized Reinforcing Mesh 1 | Galvanized Reinforcing Mesh Construction Structure2 |
 |  |
| Highway Application 3 | Flowers Breeding Industry Application 4 |
Ribbed steel mesh, Skeleton Steel bar netting, Anti-cracking reinforcement netting is one of widely used in welding wire mesh panel, divided into Black iron panel, electro-galvanized and hot-dip galvanizing of three different forms. Let us introduct the galvanized next step:
1. Electric galvanizing process: the working principle of the cold galvanized welded wire mesh is using in high school chemistry active metal to inactive pole shift principle, the DC power supply for zinc anode gradually ran to the welded wire mesh on. This coating is thinner, and the corrosion protection effect is shorter than that of the relatively.
2. Hot-dip galvanizing process: hot dip galvanizing is the zinc melting into liquid, parent material immersed in, that of zinc can and parent material formation mutual infiltration, it is closely integrated, not easy to remain other impurities or defects, similar to the two kinds of materials in the coating part melt together, and and the thickness of the film is high, can reach 100 microns, so the resistance corrosion resistance high and 96 h of salt spray test no problem, is usually 10 years. Hot galvanized wire mesh quality standards: the amount of zinc per square meter has reached or exceeded 122 grams. The tolerance range of hot dip galvanized welded wire mesh: radial mesh deviation range does not exceed + - 4%, zonal mesh deviation range does not exceed + - 3%, the tensile strength are more than national standards.
